Arb 3438260 Manual do Utilizador descarregar pdf (Página 14)

Last Rev Date: 26/6/2009 Page 14 of 18 Fitting instructions# 3787027

WINCH FITMENT ONLY

52. Attach the control box to the control box

bracket as shown.

53. Fit the control box to the bull bar with two M8

x 25mm bolts, M8 flat washers and M8 flange

nuts.

54. Run the cables through the rubber grommets

and connect to the winch as per the wiring

diagram supplied with the winch.

55. Using cable ties fix the cables securely and

ensure they are well away from any moving,

sharp or hot surfaces.

BULL BAR FITMENT TO VEHICLE

56. With assistance guide the bull bar into

position on the vehicle. The uprights on the

bull bar sit inside the impact absorber blades.

57. Bolt the bull bar into position using the M12

bolts, spring washer, large body washer and

flange nuts 3 places each side as shown.

Tighten the bolts firmly – but allow enough

movement for the bull bar to be adjusted

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sem comentários

Arb 3438260 Manual do Utilizador Página 14